Stacker3d Launches Impressive 3d printer on Kickstarter!

Introduction

In the past few months the world has seen the power of 3D printing in action. As Covid-19 continues to disrupt and overwhelm global supply chains the 3D printing community has stepped in to fill the gaps with masks, face shields, swabs, ventilator parts, and more. The importance of local and on-demand manufacturing has never been more clear.

Face Shields – model by 3DVERKSTAN

Imagine if every small business, college, hospital, or fortune 500 company had just one 3D printer? Of five of them? Just imagine the impact this would have. It’s time for all industries to get involved with 3D printing. It’s time to establish your own manufacturing plant. Your own print farm. Your own creative space. It’s time for you to get the essential office machine.

from Prototype to Production the F1 has you covered

Essential Machine – Essential Accessories

We are proud to introduce our new F1 3D Printer and line of F-Series accessories. It’s where high performance meets incredible value. We did our best to infuse the F1 with best-in-class safety, print quality, and reliability. It’s also the most affordable industrial grade 3D printer we have ever built. We also did our best to design much needed accessories that work with nearly all 3D printers on the market today. 

NOTE: just to be clear, the F1 printer does not come with an F-BOX, F-PAC, or F-FLEX, these must be added to your pledge. See the FAQ.

 Note:  F1 printers do not include the F-BOX, F-PAC, or F-FLEX accessories, even though it’s shown in the photo. The F1 reward tiers correctly list the items that are included with the F1. 

1. Safety

We take safety very seriously because we know where our F1 printers are going to end up: at hospitals, business offices, schools, research labs, shop floors, college dorm rooms, and of course, people’s homes. We all know that 3D printers are run overnight, and sometimes for days on end. We also know that many users run their printers unattended. That’s why we built a printer with unmatched safety features. 

Advanced thermal runaway protection. What’s thermal runaway? Basically, it’s when your hot end keeps heating up and wont shut down until you cut the power. This can happen if your controller board fails, the temp sensor fails, the temp sensor gets dislodged from the heater block, or your firmware freezes and fails to reset. 

Most printers on the market today only rely on firmware to protect against thermal runaway. Software is not good enough. To make matters worse a lot of cheap printers didn’t even enable these basic software protections, even though they are built into the firmware. In the vast majority of cases firmware protection works well at protecting you. However, no firmware is going to protect you if it crashes or if you experience a controller board or temp sensor failure.

The F1 solution. That’s why the F1 incorporates redundant specialty electronic power cut-off circuits. These specialty circuits are completely independent from the firmware or other software controls. In other words, a bad transistor or crashed firmware is not going to prevent the specialty safety circuit from doing its job. The F1 also uses two temp sensors for added security. That’s right, two temp inputs, and each input is run through it’s own specialty circuit. If the circuit reads a temp higher than 325 C it will cut the power to your hot end. Please see the illustration below.

Better temp sensors, mounted better. The F1 uses PT100 temperature sensors made from Platinum, so they are extremely reliable. Furthermore, we designed our hot end to specifically prevent the temp sensors from dislodging during use. First, we use TWO temp sensors to add redundancy, as mentioned above. Second, we use multiple fastening points to retain the sensors. Third, our temp sensors are potted into metal cartridges, which allows us to attach them more securely. Finally, we engineered the cable management of the hot end wires to further prevent the sensors from coming loose.

Special hot end heat break and heat sink. We also use a special Bi-Metallic heat break sourced from Slice Engineering to keep the heat in the heater block instead of migrating upward into the rest of the hot end assembly. Not only does this improve the printing process, it makes the hot end safer overall. Finally, we designed our own heat sink to bleed off any excess heat that rises from the heat break.

The filament drive and hot end mount uses UL approved flame retardant materials for an extra level of safety. The hot end heat sink and heat break were designed to bleed off the heat before it can rise and damage the other components on the print head.

Insulated and guarded heater block. The stainless steel guard around the heater block helps reduce severe burning. It still gets very hot, so be careful!

All connectors are genuine MOLEX brand, not some cheap offshore knockoff found on many 3D printers. Moreover, we selected connectors that are rated to carry at least double the circuits required amperage. If that wasn’t enough, we only use glow wire rated connector housings. This means that if you take a hot iron (the glow wire) and pushed it into the connector, the connector would just melt instead of burning up.

Special Z rod guards protect your hair and fingers from getting pinched or wrapped up. Each Z Axis lead screw gets its own guard. This also keeps the lead screws cleaner and reduces maintenance.

Advanced firmware. The F1 uses a modular firmware by Repetier that includes the standard thermal runaway protections found in other firmwares, but it also includes a watchdog system that helps identify firmware crashes. If a crash is detected it resets the printer to rectify the situation. 

2. Print Quality

How do we achieve best-in-class print quality? We do it by getting rid of resonance, zero crossing moire patterns, ringing, z wobble, thermal banding, and other artifacts that show up in your prints. Oh, how did we do that? Now that’s where it gets complicated! It involved engineering, proper selection of components, and lot’s of testing. Here’s a few examples.

Engineering

We started by making the F1 frame and gantry system as strong and rigid as we could. The frame is then perfectly squared during assembly, and will stay that way for the life of the printer (unless you drop it off your desk onto a concrete floor!). Next, we engineered a simple but effective chassis dampening system using visco-elastic polymer because it has a very high dampening coefficient. It combines shock absorption, good memory, vibration isolation and vibration damping characteristics. Cheap rubber feet would have saved us a lot of money, but that’s not what the F1 is about.

Next, we designed the best filament drive and hot end we could. Our filament drive uses our special filament drive gears and gear reduction design for increased power and precision. The drive gears are hardened steel and the reduction gears are stainless steel, not plastic. The F1 hot end is all metal and carbon fiber ready. The key to making a high performance hot end that works with a large spectrum of filament types is to use a heat break that has the highest temp gradient you can find. 

 project video thumbnail

Accuracy

3D printing is about more than just creating “perfect” and pretty looking prints. Best-in-class print quality is also about parts that are accurate, and fit together. Parts that have sharp corners and no over extrusion. 

The F1’s firmware incorporates a hot end pressure balancing feature that reduces the extruder movement precisely as needed before the hot end reaches any portion of the part that slows down. This allows the pressure inside the hot end to release and do the extruding instead of the filament drive. It’s clever and it works great. In fact, the F1 doesn’t require any slicer tricks, like coasting or wiping (combing).

 Here is an example of the quality you can expect from your new F1. Most of these prints are just stunning, and big credit goes to the following designers: Fotis Mint, Clockspring3D, Wekster, Daniel Noree, 3Dprintlab, and Sid Naique. We’ll have full credits and high res photos for these designers up on our website soon. 

 project video thumbnail

 This model by clockspring3d is a great example of what print-in-place looks like.

 project video thumbnail

 This is varioshore filament from colorFabb. You can change the level of softness by changing the temperature. This part is all the same filament!

Operator box by clockspring3d – just to show you that functional can also be clever and beautiful.
Logo plate printed in I-Beam Blue Wax, a special filament for investment casting patterns. Top part is the titanium casting.

 3. Reliability 

It starts with engineering and ends with the selection of premium components and high quality manufacturing.

Better by design.

We all know that  hot ends jam for a variety of reasons. The cause is usually wet filament, improper retract settings, bad temp settings, poor quality filament (bad diameter tolerance or debris in the filament) and bad hot end engineering. Oh, leaving the hot end idle at full temp for a few hours is another great way to jam your hot end! If you’re like us you’re not perfect, that’s why the F1 hot end can be changed in seconds. This makes it fast and easy to change nozzles too.

Another amazing RC airplane part from 3Dlabprint, printed in colorFabb LW PLA, half the weight of regular PLA.

Premium Components

Lets take a close look at the 600 watt power supply built by Artesyn. The price of this key component is over $250. Heck, you can buy an entire offshore 3D printer for this price! So why do we use a premium power supply instead of one we can source offshore for 25 dollars, or less? Reliability and performance and safety. Our power supply incorporates PFC (power factor correction) which ensures that input voltage and current waveforms are as sinusoidal as possible. Besides, PFC is required by international regulations. Cheap power supplies don’t use PFC  and are not as reliable. Our power supply carries a 2 year warranty and should run for many years under normal use. 

Artesyn LCM600 series power supplies

Another example is our Vanadium nozzles made by Slice Engineering. These high speed steel nozzles are alloyed with Vanadium (increases strength and hardness) and then hardened to 65 Rockwell C. They cost over 30 dollars and imported nozzles cost less than 2. You get what you pay for. Slice nozzles carry a lifetime warranty against abrasion, and cheap nozzles wont last one roll of carbon fiber filament. We want you to swap nozzles to change your extrusion widths, not because they’re worn out.   

Vanadium nozzles we use on the F1
Control your printer from any computer or web enabled device. Repetier Servo Pro comes with every F1 printer. It’s the easiest and fastest way to run your printer.

Is the F1 for you?

We built the F1 for every type of business, school, or organization. It’s a true industrial grade printer, so this means it’s perfect for work groups big and small. It’s also ideal for print farms and maker spaces. The F1 is a high performance printer with advanced safety features. This means it’s safe enough for hospitals, research labs, schools, offices, and of course, your home. 

STACKER F1 FEATURES

  •  T-Slot Accessory Rail: Use the upper rail to mount your tool caddy, webcam, filament spool holders, etc
  •  Zero Maintenance V-Slot Wheels: ultra smooth, no noise linear motion
  •  Quad-Gear Filament Drive: powerful and flex filament ready
  •  Quick Change Hot Ends: swap nozzle sizes fast, all metal, 310C max temp
  •  Hardened Steel Nozzle: a must for abrasive filaments, made by Slice Engineering
  •  Dual Heater Blocks: faster and more even heat distribution for more even extrusion
  •  Redundant Electrical Cut-Off Circuits: These special circuits guard against thermal run-away of the hot end, the most critical part in any 3d printers. Provides: an extra safeguard beyond the standard firmware protections (firmware alone is not enough!), a must for safer printing, uses dual PT100 temp sensors for even more reliability
  •  Ultra Flat Print Bed: with auto bed leveling,a flat bed is key for proper fitting parts, bed leveling is, and should only be, for adjusting first layer heights to the particular bed surface
  •  Print Bed: Cast aluminum precision ground, with a 300 watt silicone mat heater and “Level Once” bed levelers.
  •  Carry Handle and LED Light Bar: comfortable grip and looks cool
  •  Customizable Front Logo Plate: print your own in the color you like
  • Dual Z Screw Guards: keeps hands and hair safe
  •  600 Watt Industrial Grade PSU: PFC type for EU regulations, smoothes out A/C pulses, more efficient, quiet,safe, reliable. Artesyn model LCM600Q-N
  •  Stacker Designed 32bit Electronics: faster printing, smoother and quieter operation, advanced safety features built-in
  • Wire free controller box: eliminates the potential for shorted wires and reduces heat and complexity
  •  Genuine Molex Brand Glow Wire Electrical Connectors: Safest connectors on the market, oversized to easily handle the current loads.
  •  Motor Drivers: ultra quiet type for smooth operation
  •  High Resolution Stepper Motors: 2X more precision over standard motors
  •  Ultra-Rigid Frame and Ganty: superior prints at a faster pace
  •  Flexplate System with BuildTak PC and PEI Bed Surfaces: optional nylon surface also available
  • Visco-elastic Dampening System: reduces noise and vibration, better print quality, won’t mar your table top
  •  Repetier Firmware: our custom version uses advanced motion planning and pressure balancing hot end controls to prevent over extrusion
  •  Repetier Server Software (requires dedicated pc, linux embedded device, or Pi): the best way to control your printer from any web enabled device, webcam option, time lapse, and a host of other amazing features, enterprise ready, NO WIFI for increased security (you can add WIFI with a Pi, we strongly recommend ethernet)
  •  Slicing software: One licence for Simplify3D, powerful and highly accurate slicing, multiple process feature, fantastic multi material print capabilities and the industry standard for generating support structures that break away cleanly. 
  •  285 x 285 x 285 mm Print Size: big prints from compact desk-sized printer
  • Compact Frame: fits on your desk
  •  Filament Spool Location: Multiple mounts available for front, top, rear mounting
  • F-BOX Compatible: Mounts in multiple locations
  • Made in the USA

Print Bed Surfaces

Genuine BuildTak brand flex plate and sheets

 We partnered with BuildTak to manufacture our custom printed PEI and Polycarbonate bed sheets and flex plate system for two reasons. First, they know what they’re doing. They are also a print shop, so they know how to produce high quality prints. Second, they make their products in the USA, and they don’t use cheap offshore components.  Again, it’s not the cheapest way to make a 3D printer, just the best. The F1 comes with a single steel flex plate, a mag base, and one sheet each of the PEI and PC. The black sheet is genuine Garolite and works amazingly well for nylon, sold separately. The PEI sheet has easier part release for a wider range of materials, but doesn’t hold has tight as the original PC sheet, especially when using PLA, PC, and PETG. 

Autodesk/Kickstarter FDM Test

We scored 28 out of 30. If you’re getting a lot of stringing between the spires it probably  means that your filament needs to be dried (and/or your retract and esteps are incorrect). Here’s how we scored it. Go here for more info on this test. 

  • Dimensional Accuracy: Score of 5
  • Fine Flow Control: Score of 5
  • Fine Negative Features: Score of 4
  • Overhangs: Score of 4
  • Bridging: Score of 5
  • XY Resonance: Score of 2.5
  • Z-axis alignment: Score of 2.5

It starts with a sketch

Step one for any new product starts as an inspiration, filling of a need, and filling of a demand. And then we sketch the product, the market, the features, etc. In other words, we make more of a story board than a pure sketch. It gave us a road map before we started the CAD modelling stages. As soon as we started to generate CAD models we began to test.

Here we’re discussing the relationships between our key verticals and feature set. It’s super important to understand what the market demand is so you can deliver on the final product. Below is the final CAD model we used for the printers you see in the video.

We usually begin by building discrete sub assemblies and important components, like the F1 Y axis (print bed) assembly shown below. The F1 uses a special 80mm wide extrusion for the Y axis, or moving print bed. This gives it rock solid stability so your prints come out accurate and looking fantastic.

First prototype Y Axis for F1

 T

The frames are now complete. 

And then we keep adding more and more components until we’re getting close to a finished prototype. We use advanced prototyping shops for metal, CNC, 3D printing (including a lot of prints on our own fleet of 3D printers), and fabrication. We like to have prototypes that VERY closely relate to the final product. This type of prototyping style costs more up front, but saves you a TON of headaches later when you’re into production of your first units. It just helps eliminate the inevitable surprises!

We went through a number of filament drive iterations until we finally settled on design shown on the bottom of this photo. We’re especially proud of our filament drive because it’s just so reliable, and so strong, and so light. It integrates the following components into a single 3D printed production part.

  • adjustable print head mounting bracket
  • filament out sensor bracket
  • fan mount bracket
  • ABL sensor mount
  • blower mount bracket
  • hot end attachment bracket
  • wire and cable management
  •  filament guide tube mount
  • belt guard

No matter what printer you own or what type of printing you do, we all want stronger, better looking, and more reliable 3D prints. It’s why we spend our money on top quality printers, filament, and other performance upgrades like better nozzles.

But there is one performance upgrade that is better than all the rest combined. This upgrade is guaranteed to make your prints stronger and better looking, and this upgrade works on any 3D printer. And it’s really affordable.

It’s called dry filament!

F-BOX mounted on a Prusa MK2

 No question about it, dry filament makes your prints stronger, better looking, and the printing process more reliable. The problem is that there is no easy and quick way to dry your filament, and keep it that way while you’re printing. If there was we would all be doing it. The current ways of doing it are just not very convenient, compact, and effective.

F-BOX can feed filament right from your desktop!

 The F-BOX works with ALL 3D printers (that use filament of course!). We already have designed custom mounting brackets for most popular printers. CAD files and STL modes will be available on our website by the time this product ships. Or, simply feed your filament from the desktop, as shown above. Use the PTFE guide tube that comes with every F-BOX.

The F-BOX works great on all printers, like this Creator.
Or mount it to your CR10 with this custom printed bracket!
The F-BOX is super easy to load!
Note, the F-BOX ships with TWO desiccant packs, not three. Extra desiccant packs will be available on our website soon.

WHY WE NEED TO USE DRY FILAMENT

Nobody likes ugly prints with a poor surface finish, so for this reason alone you should be drying your filament, but there are two more important reasons.

First, dry filament produces much stronger parts. You dry your filament to prevent polymer chain degradation, known as hydrolysis. Hydrolysis leads to really weak parts. The strength of your filament is derived from long chains of polymers. When humidity gets into your filament it acts like a knife, cutting up the long polymer chains into much shorter ones. 

Once your filament is dry you need to keep it this way at all times, before, during, and after the printing process is complete. In other words, drying your filament is good, but if you don’t dispense it from a dry box it will pick up new moisture in as little as 15 minutes. Also, don’t expect your filament to be dry from the factory. It’s not even close. Polyethylene bags are not impervious to air moisture. 

What size spools does it fit?
     1 Kg spools and smaller

Benefits

  •  Reduces jamming and stringing
     
  •  Dramatically improves print quality and layer bond strength
     
  •  Works with all filament, especially needed for ABS, PLA, PETG, PVA, Nylon,
     
  •  Keeps your filament dry, clean, and safe
     
  •  Helps reduce filament overrides
     
  •  Stackable design saves space
     
  •  Saves you time and money
     
  •  Better first layer adhesion
     
  •  Keeps you filament clean and dry
     

Features
Note: the F-BOX comes with TWO desiccant packs, not three as shown in some photos.

  • Exclusive square thru hole allows you to mount the F-BOX directly to any 3D printer! (may require printing a new square post spool holder, STL files available on our website).
         • Special seals keep out the moisture and dust.
         • Four quick release latches ensure a tight seal
         • Open lid design allows for fast filament spool changes
         • High performance quick change desiccant cartridges.
         • Color changing desiccant to let you know when a recharge is necessary
         • See thru box design for easy identification of filament levels, color, type, etc
         • Bowden tube fittings allow for closed loop dispensing and custom length tubes
         • Stackable, nesting, interlocking design.
         • Tightly sealed box to extend the life of your desiccant
         • Recharge your desiccant over and over and over.

The design
 We spent months perfecting the design of the F-BOX. There’s a lot more to this product than meets the eye. Take the spool post, it snaps into the main housing and has two special seals to keep out the elements, while allowing your filament to effortlessly unspool. The lid has four latches to ensure a proper seal. The high quality fitting has dual o-rings to create a perfect seal. The feet allow the boxes to stack and nest. Finally, the exclusive square thru hole allows the F-BOX to be mounted directly on your printer.

F-BOX early prototypes

As you can see our first model was, how should we say, a start?  It was a bit too big and clumsy. By model two we were off to the races and our final iteration proved to be everything we wanted. Along the way we went through MANY iterations of the feet, latches, and center post, not to mention the gasket types, sizes, etc. There is a lot more to this product than meets the eye.

We combined our F-BOX, F-PAC, and F-Flex into the Essential Accessory Kit.

F-FLEX Part Removal Tool

Removing prints from the build plate is an essential aspect to 3D printing in general. Even with modern “flex” plates, like those on the F1 and many other printers, the preferred method is still the scraper, especially for smaller parts. 

The problem with using a putty knife is the blade is too thick, the edge too dull, and the corners to sharp. We designed the F-FLEX to solve these problems. 

First, we designed the blade with just the right amount of flex. Second, we made the blade incredibly thin and sharp, very sharp. Third, we gave the blade special rounded edges to prevent it from digging into your build plate. Fourth, we fitted it with an ergonomic soft grip handle. Finally, a striking cap in the handle will allow you to “knock-off” your models.  

We can’t stress this point enough, THIS BLADE IS EXTREMELY SHARP! So please be careful and do not let children use this product. Always keep your hands behind the blade in case your print suddenly breaks loose.  

F-PAC High Performance Desiccant Pack

We know that most users store their opened spools of filament in big airtight containers, like these. It’s simple, effective, and affordable. Just make sure you’re using ones with foam gaskets for the best performance. It’s surprising how long your filament will stay dry in these boxes if you use enough desiccant. That’s why we designed the F-PAC.

The F-PAC holds a LOT of desiccant. About 2.5 lbs or 1130 grams.

 WHAT IS IT?
     The F-PAC is a custom designed high capacity desiccant pack used for keeping your filament dry. Contains approximately 2.5 lbs (1130 grams) of desiccant.

WHAT SIZE CONTAINER DOES IT FIT?
     It fits virtually EVERY container on the market today. Use one F-PAC for 5 -10 gallon containers, and more for larger ones.The size of the F-PAC is about the same size as a spool of filament.

 WHAT DOES IT DO?
     The F-PAC is a high performance molecular sieve. It absorbs moisture from the air.

FEATURES
     • High performance desiccant
     • Color changing desiccant to let you know when a recharge is necessary, the orange color is NOT a hazardous substance (the blue desiccant contains cobalt, and is hazardous).
     • Recharge your desiccant over and over and over, great value.

MISCELLANEOUS

  • Weight: 2.5lbs (1130 grams)
  • Shipping weight: 3 lbs
  • Box material: Polycarbonate
  • Chemical Description Orange to Green Indicating Silica Gel
  • Formula SiO2 + H2O + C25H30ClN3
  • CAS (R Phrase Classification) 112926-00-8 amorphous silica 98.2%, activated coloring agent 0.2% max

Making a video during a pandemic

We thought long and hard about how we were going to keep everyone safe in our office. Of course the first thing we did was have everyone wear a mask during the entire shoot, except for some on camera work.  We also limited the number of team members present at the shoot to just a small handful. Finally, we opened all the doors and windows and we used a number of portable HEPA air filtration units. The good news is that nobody got sick and we are all extremely grateful for that.

Luke and John from TTPro doing their thing!

Why we chose Kickstarter?

For us this was an easy decision. First, this is our third campaign, so we have come to really value our backers on this platform. Second, Kickstarter is a fantastic platform to let the world know about your new ideas. Finally, most trade shows have been canceled for 2020 and this limited our reach. Getting early backers is so crucial to these types of products, because they take a huge amount of up front cash for molds and inventories. It’s backers like you that really make a difference in the world. Without you a lot of products would simply never see the light of day, even from established companies. Thank you for your support Kickstarter! 

We are really impressed by the printer at least via the videos and photos and the company. The design specifications and promised capabilities are impressive too. We backed the accessories since they are in the budget. If we had the funds we would back the kickstarter without a doubt or hesitation!

Uber to Acquire Postmates

July 06, 2020

Combination of platforms to provide more choice and convenience for consumers, increased demand and tailored technology offerings for restaurants, and new income opportunities for delivery people

SAN FRANCISCO–(BUSINESS WIRE)– Uber Technologies, Inc. (NYSE: UBER) and Postmates Inc. today announced that they have reached a definitive agreement under which Uber will acquire Postmates for approximately $2.65 billion in an all-stock transaction.

This transaction brings together Uber’s global Rides and Eats platform with Postmates’ distinctive delivery business in the U.S. Postmates is highly complementary to Uber Eats, with differentiated geographic focus areas and customer demographics, and Postmates’ strong relationships with small- and medium-sized restaurants, particularly local favorites that draw customers to the Postmates brand. Additionally, Postmates has been an early pioneer of “delivery-as-a-service,” which complements Uber’s growing efforts in the delivery of groceries, essentials, and other goods.

For restaurants and merchants, Postmates and Uber Eats will together offer more tools and technology to more easily and cost-effectively connect with a bigger consumer base. Consumers will benefit from expanded choice across a wider range of restaurants and other merchants. And delivery people will enjoy more opportunities to earn income, with increased batching of orders to make better use of their time. Following the closing of the transaction, Uber intends to keep the consumer-facing Postmates app running separately, supported by a more efficient, combined merchant and delivery network.

“Uber and Postmates have long shared a belief that platforms like ours can power much more than just food delivery—they can be a hugely important part of local commerce and communities, all the more important during crises like COVID-19. As more people and more restaurants have come to use our services, Q2 bookings on Uber Eats are up more than 100 percent year on year. We’re thrilled to welcome Postmates to the Uber family as we innovate together to deliver better experiences for consumers, delivery people, and merchants across the country,” said Uber CEO Dara Khosrowshahi.

“Over the past eight years we have been focused on a single mission: enable anyone to have anything delivered to them on-demand. Joining forces with Uber will continue that mission as we continue to build Postmates while creating an even stronger platform that brings this mission to life for our customers. Uber and Postmates have been strong allies working together to advocate and create the best practices across our industry, especially for our couriers. Together we can ensure that as our industry continues to grow, it will do so for the benefit of everyone in the communities we serve,” said Postmates Co-Founder and CEO Bastian Lehmann.

Uber currently estimates that it will issue approximately 84 million shares of common stock for 100% of the fully diluted equity of Postmates.

The boards of directors of both companies have approved the transaction, and stockholders representing a majority of Postmates’ outstanding shares have committed to support the transaction. The transaction is subject to the approval of Postmates stockholders, regulatory approval and other customary closing conditions and is expected to close in Q1 2021. Wachtell, Lipton, Rosen & Katz served as legal counsel to Uber. J.P. Morgan Securities LLC served as financial advisor and Latham & Watkins LLP as legal counsel to Postmates.

Conference Call with Uber Executives to Discuss Transaction

Today at 5:30 a.m. Pacific Time (8:30 a.m. Eastern Time), Uber CEO Dara Khosrowshahi will host a conference call with Uber CFO Nelson Chai to discuss the transaction and answer questions from financial analysts. The live webcast of the conference call and a slide presentation will be available on the Uber Investor Relations website at investor.uber.com.

Uber Second Quarter 2020 Results Conference Call

Uber will hold its quarterly conference call to discuss its financial results for the second quarter of 2020 on Thursday, August 6, 2020, at 1:30 p.m. Pacific Time (4:30 p.m. Eastern Time).

A live webcast of the conference call and earnings release materials can be found on Uber’s Investor Relations website at investor.uber.com. A replay of the conference call will be accessible for at least 90 days.

Forward-Looking Statements

This communication contains forward-looking statements regarding Uber Technologies, Inc.’s (“Uber,” “we” or “our”) future business expectations which involve risks and uncertainties. Actual results may differ materially from the results predicted, and reported results should not be considered as an indication of future performance. Forward-looking statements include all statements that are not historical facts and can be identified by terms such as “anticipate,” “believe,” “contemplate,” “continue,” “could,” “estimate,” “expect,” “hope,” “intend,” “may,” “might,” “objective,” “ongoing,” “plan,” “potential,” “predict,” “project,” “should,” “target,” “will,” or “would” or similar expressions and the negatives of those terms. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. These risks, uncertainties and other factors relate to, among others: risks and uncertainties related to our pending acquisition of Postmates Inc. (“Postmates”), including the failure to obtain, or delays in obtaining, required regulatory approvals, any reverse termination fee that may be payable by us in connection with any failure to obtain regulatory approvals, the risk that such approvals may result in the imposition of conditions that could adversely affect us or the expected benefits of the proposed transaction, or the failure to satisfy any of the closing conditions to the proposed transaction on a timely basis or at all; costs, expenses or difficulties related to the acquisition of Postmates, including the integration of the Postmates’ business; failure to realize the expected benefits and synergies of the proposed transaction in the expected timeframes or at all; the potential impact of the announcement, pendency or consummation of the proposed transaction on relationships with our and/or Postmates’ employees, customers, suppliers and other business partners; the risk of litigation or regulatory actions to us and/or Postmates; inability to retain key personnel; changes in legislation or government regulations affecting us or Postmates; developments in the COVID-19 pandemic and resulting business and operational impacts on us and/or Postmates; and economic, financial, social or political conditions that could adversely affect us, Postmates or the proposed transaction. For additional information on other potential risks and uncertainties that could cause actual results to differ from the results predicted, please see our Annual Report on Form 10-K for the year ended December 31, 2019 and subsequent Form 10-Qs or Form 8-Ks filed with the Securities and Exchange Commission (the “SEC”). All information provided in this communication is as of the date of this communication and any forward-looking statements contained herein are based on assumptions that we believe to be reasonable, and information available to us, as of such date. We undertake no duty to update this information unless required by law.

No Offer or Solicitation

This communication shall not constitute an offer to sell or the solicitation of an offer to buy any securities, nor shall there be any sale of securities in any jurisdiction in which such offer, solicitation or sale would be unlawful prior to registration or qualification under the securities laws of any such jurisdiction. No offering of securities shall be made except by means of a prospectus meeting the requirements of Section 10 of the U.S. Securities Act of 1933, as amended.

Important Additional Information Will be Filed with the SEC

Uber will file with the SEC a registration statement on Form S-4, which will include a prospectus of Uber. INVESTORS ARE URGED TO CAREFULLY READ THE REGISTRATION STATEMENT AND OTHER RELEVANT DOCUMENTS TO BE FILED WITH THE SEC IN THEIR ENTIRETY WHEN THEY BECOME AVAILABLE BECAUSE THEY WILL CONTAIN IMPORTANT INFORMATION ABOUT UBER, POSTMATES, THE PROPOSED TRANSACTION AND RELATED MATTERS. Investors will be able to obtain free copies of the registration statement and other documents filed with the SEC through the website maintained by the SEC at www.sec.gov and on Uber’s website at investor.uber.com.

About Uber

Uber’s mission is to create opportunity through movement. We started in 2010 to solve a simple problem: how do you get access to a ride at the touch of a button? More than 15 billion trips later, we’re building products to get people closer to where they want to be. By changing how people, food, and things move through cities, Uber is a platform that opens up the world to new possibilities.

About Postmates

Postmates is a leader in on-demand food delivery. The platform gives customers access to the most selection of merchants in the US with more than 600,000 restaurants and retailers available for delivery and pickup, many of which are exclusive to Postmates. The market leader in Los Angeles, Postmates operates in all 50 states. Customers can get free delivery on all merchants by joining Postmates Unlimited, the industry’s first subscription service. Learn more or start a delivery by downloading the app or visiting www.postmates.com.

View source version on businesswire.comhttps://www.businesswire.com/news/home/20200706005133/en/

Press:
For Uber:
press@uber.com

For Postmates:
press@postmates.com

Slice Engineering Copperhead Hotend!

We are fans of Slice engineering and are impressed by their new products. We had tested and reviewed their mosquito last year. Now they recently launched a new hot end that is awesome and a bit more affordable.

, The Copperhead 3D Printer Hot End
The Copperhead hot end [Source: Slice Engineering]

The Copperhead is designed by Slice Engineering, a Florida-based firm that previously introduced the Mosquito hot end, a  450C device that featured a “one handed change” capability. Now they’ve come up with an improved hot end they call the Copperhead. 

There’s a good reason for calling it the Copperhead, as it is made from a great deal of copper. As you can see in this diagram, they use a bimetallic structure involving copper, aluminum and steel elements. 

They’re attempting to increase the effectiveness of the heatbreak. This is the component that separates the cold and hot zones within the device, and it is critical to correct extrusion. 

The reason has to do with the contradiction required within the “hot end”. One segment must heat up and soften the filament suitable for extrusion, but the other end must maintain a colder temperature so that the filament remains rigid and able to be pushed into the hot zone. 

3D Printer Heatbreak Problems

Today’s hot ends generally do this quite well. If they don’t, then the filament becomes soft where it should not and extrusion problems result. Usually this is a stripped filament, as the gears gripping the filament simply pull off chunks of soft material rather than pushing the filament. 

But there’s another effect that’s been happening in 3D printing these days: high temperature 3D printing. This is a result of increased interest in the use of engineering materials such as PEEK or ULTEM. 

These high temperature materials require, obviously, higher extrusion temperatures. But that means the hot zone is hotter, and the cold zone must somehow remain cold despite being attached to a much hotter hot zone. 

If inefficient, the higher heat could leak upwards into the cold zone and cause issues and ultimately filament jams. This is particularly evident on long duration 3D print jobs, where there is a lot more time for that heat to seep into the cold zone.

The Copperhead Hot End

, The Copperhead 3D Printer Hot End
Explanatory diagram of the Copperhead hot end [Source: Slice Engineering]

Enter the Copperhead. It is specifically designed to maintain the two separate thermal zones with the use of copper. That metal has excellent thermal transfer properties, and their design seems to leverage that very well. 

Slice Engineering claims the Copperhead “conducts 60% less heat” across the heat break, and they’ve been able to verify this by using a thermal camera to observe the flow of heat, as seen here:

, The Copperhead 3D Printer Hot End
Thermal image of the Copperhead hot end [Source: Slice Engineering]

Mounting The Copperhead Hot End

The Copperhead is designed to be easily mounted on many different 3D printer platforms and systems. They explain: 

“There are a few variants of the Copperhead™ (please see the Copperhead™ Variants table on the main campaign page), but three main mounting methods:

1. Groove mount – this is a standard groove style adapter common on many 3D printers. It includes a fitting to retain a PTFE tube

2. Heat break clamp – the “Standard” and “Mk10” variants of the Copperhead™ have straight shanks which can be clamped onto with a shaft collar or held in place with a set screw

3. Threading – the “RepRap 1.75”, “RepRap 2.85” and “Mk 8” versions of the Copperhead™ thread directly into a heat sink or base plate on the OEM extruder or carriage/end effector.”

, The Copperhead 3D Printer Hot End

We are going to order one of their hotends soon to test and review on our Lotmaxx SC-10 or the JGMaker A5S or one of the future printers that we are reviewing and beta testing soon.

Please click here to check out more information from Slice Engineering’s website https://www.sliceengineering.com/products/copperhead%E2%84%A2

Creality’s successful Kickstarter Campaign for an exciting new 3d printer!


From printing urgently needed medical equipment to cater to other specific needs through the use of 3D printing, this is a technology that has gained an unprecedented angle of social impact. That’s why we’re even more strongly committed to enabling the ease of use and affordability of this technology by developing the CR-6 SE 3D Printer and making it available to every creative mind out there.

Harnessing the power of 3D printing shouldn’t be as expensive and complicated as it has been. That’s why we created Creality’s CR-6 SE DIY 3D Printer, a simple and robust aluminum-built modular 3D printer that features an intelligent leveling-free system for superior accuracy and advanced 3D printing features, in an easy-to-use printer that is also affordable.

No complications. No special skills required. No confusion. Your CR-6 SE is ready to use out of the box. You can easily assemble it in only 5 minutes and then all you need to do is plug it in and switch it on. The CR-6 SE 3D Printer starts working and delivering amazing results—whether you’re a pro or a newbie—in almost no time!

For the most part, accurate 3D printing is the result of a leveled bed. That’s usually a challenging goal, though, because most 3D printers will present nozzle clogging, poor adhesion, and generally unleveled-related issues that compromise the quality of prints. The CR-6 SE offers precisely the opposite. Featuring an innovative true Leveling-Free Technology, this is a 3D Printer that lets you always rely on highly accurate results.

Never see your creativity and productivity affected by nozzle-related replacement issues. The CR-6 SE is designed with a modular nozzle that means you can customize it. From the heat block to the nozzle tip, among other parts, this is a Modular 3D Printer that’s easy to keep!

Better heat dissipation with unique caved heat sink

With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about!

Photoelectric filament sensor and flexible fixator

3D printers shouldn’t be annoying in the noise they make, which is why we added a Silent Chipset to the CR-6 SE. Its latest Trinamic driver helps to ensure that voltage control, fast movement and printing in silence are a given. We know: you’ll thank us dearly for that!

You only want hot, excellent, superb printing results, right? Well, the CR-6 SE 3D Printer comes with a carborundum glass hotbed platform that is flatter than aluminum and which offers a stellar thermal performance that ensures quick heating up, strong adhesion and prints that are easy to remove.

The CR-6 SE 3D Printer looks as strong as it is. It also looks very stylish! This amazing work station has a beautiful design that compliments any desktop you use it on. Meanwhile, self-designed profiles and stepper motor cover prevent from filament scraps and dust. The CR-6 SE also comes with a well-arranged ribbon cable that ensures safety issues are never a concern.

Sounds like the perfect 3D printing equation, right? This unique printer is designed with a wider foundation and equipped with dual Z-axises matched with an adjustable timing belt that translates into reduced unwanted motion and improved refined results. So the stability of the machine and its performance is simply impressive.

Weighing only 9.2kg and with manageable dimensions (442*462*540mm), the CR-6 SE is a 3D Printer that you can carry. In fact, it features a convenient removable handle that makes it easy to carry whenever you need to.

User experience improved by optimized details like sealed aluminum profiles, foldable filament holder, tools storage box, belt tensioner. 

  • Toolbox
  • Foldable spool holder
  • Adjustable belt tensioner
  • Flexible hotbed fixator

These are the three magic words that basically mean that your CR-6 SE will keep your printing performance running smartly and smoothly. If the machine suddenly runs out of filament or if it simply breaks, the printer’s photoelectric filament sensor will instantly pick up that disruption and will stop the machine. As soon as the new filament feeds in, the CR-6 SE will resume its operation without making you lose your work.

Did the power suddenly or accidentally go off? No worries! The CR-6 SE 3D Printer will resume printing if the power supply is interrupted. That’s right—you can forget about starting over because print failure is no longer an issue!

The CR-6 SE 3D Printer features a 4.3in HD Color LCD Touch Screen that allows you to easily and intuitively operate the device. Available in English and Chinese, and with a simplified and smart interface, this Touch Screen ensures that this very special printer’s user experience always equates to smooth sailing!

No dust, Neat and Notable

CR-6 SE revamps in quites a distinguished look. From the bottom to the top, the flat aluminum profiles makes the machine stylish and prevent from dust.

All-around Safety

Hassel free printing with over current protection, over-load protection, and thermal runaway protection, always keep your mind at peace.

Whatever you think of creating and shaping, the CR-6 SE 3D Printer is the powerful, convenient and creative sidekick you need. This is the printer that literally lets you unleash and give shape to your creativity.

Print your product, create prototypes, or develop complex 3D printed tools and devices. There are as many industrial applications for what the CR-6 SE 3D Printer as you can think of!

The CR-6 SE 3D Printer allows you to create spectacularly detailed architecture models, whether you need to present a project to a client or simply want to unleash your architectural creativity.

We are impressed by this new printer and would love the opportunity to test and review one..

Makerbot Sketch

ANNOUNCING THE NEW MAKERBOT SKETCH CLASSROOM FOR TEACHERS AND STUDENTS

Teaser Hero - wide angle - mobile

SKETCH Classroom is built to be the complete 3D printing classroom setup with an ideal student-to-printer ratio that maximizes students’ access and teachers’ success in the classroom

MakerBot is excited to announce the launch of the MakerBot SKETCH Classroom™ designed to be the most reliable 3D printing setup for the classroom, giving students more access to 3D printing and setting up teachers for success. The SKETCH Classroom goes beyond the hardware and incorporates MakerBot’s complete education ecosystem, providing educators and students with the tools and resources they need to succeed.

Teachers are facing significant challenges in preparing students for a rapidly changing job market. Skill sets such as problem-solving and design thinking are high in demand; however, many students today lack those skills. 3D printing can be used to teach critical thinking, but there is a sharp learning curve to using 3D printing in the classroom successfully. Teachers and students need to learn to use the 3D printer, integrate the technology into their curriculum and manage 3D printing resources in the classroom. In addition, the challenging printer-to-student ratio in a classroom requires a different workflow setup for an effective deployment.

The SKETCH Classroom addresses the challenges of 3D printing in the classroom with a solution that includes interactive certification courses for both teachers and students that trains them on how to use the MakerBot SKETCH 3D printer, create and implement engaging curriculum, and teach design thinking and problem-solving with 3D printing.

The SKETCH Classroom offers a unique workflow solution that addresses the printer-to-student ratio challenge and provides the best setup for effective deployment. The SKETCH firmware and print management software are natively connected to MakerBot Cloud™ platform and incorporate a full suite of 3D printing applications. The SKETCH Classroom software suite provides print design, preparation, and management as a single solution out of the box. Students are able to submit their designs via MakerBot Cloud through their MakerBot account on my.makerbot.com, and teachers can seamlessly manage, queue up and monitor their students’ 3D printing projects. This is designed to be the best 3D printing setup for the classroom, making 3D printing more accessible to students, and setting educators up for 3D printing success.

Sketch WIB Gama

The SKETCH Classroom includes:

  • A set of two (2) MakerBot SKETCH 3D printers, with each featuring a fully-enclosed printing chamber, a heated and flexible build plate, a particulate filter, touchscreen capabilities, on-board camera, and Wi-Fi capabilities.
  • Two (2) teachers’ and ten (10) students’ licenses for the MakerBot Certification™ programs, which certify teachers in printer operations and curriculum creation and educates students in 3D printing, innovative design thinking, problem-solving, and critical thinking skills. MakerBot provides the only ISTE-Certified 3D printer training programs with interactive and media-rich content, as well as applicable professional development credits for teachers.
  • MakerBot Cloud, a fully-connected platform that provides teachers with seamless 3D printing file management, allowing them to manage, monitor, queue, and print students’ projects from any browser. MakerBot Cloud is integrated with leading CAD design software, including TinkerCad®, Autodesk® Fusion® 360, and Onshape®.
  • Thingiverse Education™, access to over 600+ 3D printing lesson plans created by educators and designed for all grade levels and subjects, and the largest active 3D printing educator community.
  • Industry-leading support from MakerBot’s support team comprised of 3D printing experts.
  • Compatibility with MakerBot PLA and Tough™ materials; available in a wide range of colors, including yellow, blue, red, white, and grey.
  • Each printer comes with one (1) extra build plate, one (1) snips, and one (1) spatula.

“With SKETCH, we are changing the way 3D printing is used in schools and advancing the possibilities of learning to boost student innovation. We believe that SKETCH Classroom is the best 3D printing setup for the classroom, with an ideal student-to-printer ratio, making 3D printing more accessible to students, and setting educators up for 3D printing success,” said Nadav Goshen, CEO, MakerBot.

With its 3D printers in over 7,000+ schools across North America alone, MakerBot is one of the leading providers of 3D printing solutions for education. MakerBot’s education ecosystem is the most comprehensive on the market, providing thousands of educators with the tools and resources they need to successfully integrate 3D printing in their curricula.

SKETCH is easy to use and set up, and does not require tinkering, allowing teachers to spend more time integrating 3D printing within classroom learning. With a built-in particulate filter and enclosed chamber, the MakerBot SKETCH Classroom is safe to use in the classroom. Additionally, SKETCH is UL-Certified. MakerBot has tested the SKETCH 3D printer for over 46,000 hours for system reliability, subsystem, and print quality testing.

Full MakerBot Cloud integrations and additional features are planned for the coming months. SKETCH Classroom is expected to begin shipping on February 17, 2020 in North America, with availability in other regions shortly thereafter.

To learn more about SKETCH Classroom, visit www.makerbot.com/sketch.

Audio Technica-New Headphones for back to school!

Audio-Technica Makes Going Back to School Easier with New Turntable
and Headphones for On-Campus and Remote Learning

Audio Technica's ATH-M50xBT Wireless Headphones Are Worth It

STOW, OH, June 30, 2020 — Soon, students will be going back to school – but the educational landscape will be different this semester, with some learning from home and others on campus. Audio-Technica offers a variety of products that will help students hear their lessons more clearly and relax when they need to unwind, including the all-new AT-LPW50PB turntable, which is now shipping.

The AT-LPW50PB turntable (SRP: US$399.00) is designed to deliver exceptional sound from 33-1/3 and 45 RPM records, and has a stunning, high-gloss piano black finish that complements any dorm, apartment or room. It offers quiet, high-performance vinyl playback thanks to its belt drive, professional-grade aluminum platter, speed sensor-monitored motor, straight-line carbon fiber tonearm and other refinements. It comes with a pre-mounted AT-VM95E moving magnet (MM) phono cartridge and features a built-in phono preamp, allowing its use in any music system or with powered speakers.

Originally designed as a premium gaming headset, the wireless ATH-G1WL (SRP: US$249.00) is also ideal for remote learning, thanks to its high-performance features including stable, lag-free wireless connectivity, a detachable, highly directional boom mic, superior noise isolation to block outside distractions and long 15-hour battery life. And when it’s time to relax, the ATH-G1WL lets students enjoy powerful sound for gaming and eSports, with a virtual surround sound function for an even more immersive 3D audio gaming experience. The ATH-G1WL’s wireless USB transceiver ensures compatibility with computers.

For students who prefer in-ear headphones, the ATH-CK3TW combines outstanding sound quality with the convenience of truly wireless operation – there are no connecting cables to deal with. Available in black, blue and white, the ATH-CK3TW (SRP: US$99.00) features an Auto Power On/Off function that automatically turns the headphones on and connects to a paired smartphone, laptop, portable digital audio player or other compatible device when they’re removed from their case.

The ATH-CK3TW’s Bluetooth 5.0 wireless technology with aptX™ delivers superior audio quality for everything from lectures to music and podcasts. Students will also enjoy maximum clarity during phone calls thanks to the headphones’ Qualcomm® cVc™ Clear Voice Capture technology. The ATH-CK3TW is also perfect for fitness-oriented users thanks to its IPX2 water resistance rating and features Qualcomm TrueWireless Stereo Plus for reliable streaming.

Audio-Technica’s QuietPoint® ATH-ANC300TW truly wireless in-ear headphones (SRP: US$229.00) feature next-generation digital hybrid noise cancellation, to effectively block out outside noise for undisturbed studying or listening enjoyment. The headphones’ 5.8 mm DLC (diamond-like carbon) drivers deliver superlative wireless sound quality.

The ATH-ANC300TW supports Bluetooth 5.0, aptX and AAC codecs and has an easy to use control system for music playback. Its hear-through function allows some ambient sound to be heard if the listener wants to be aware of his or her outside environment. The ATH-ANC300TW also features Qualcomm cVc Clear Voice Capture for improved sound during phone calls, and  Qualcomm TrueWireless Stereo Plus to ensure stable audio streaming. The ATH-ANC300TW comes with a charging case and its operation can be customized with the AT Connect smartphone app, which provides an array of convenient tools and features.

For students who want to experience the finest in music listening and voice quality, the over-ear ATH-WP900 portable headphones combines a beautifully crafted exotic-wood finish with Hi-Res Audio performance. The ATH-WP900 (SRP: US$650.00) is meticulously crafted in Tokyo and features earpieces made from flamed maple wood that look striking, and the wood’s high density also contributes to the headphones’ clear, natural sound. The ATH-WP900 features large-diameter 53 mm drivers with high-flux-density magnetic circuits for extraordinary audio quality. It comes with standard and balanced cables, enabling its use with a wide range of electronics including high-end headphone amps and audio components.

Students won’t miss a word when they’re learning from home or remotely with Audio-Technica’s ATH-M50xBT wireless over-ear headphones (SRP: US$179.00). The ATH-M50xBT’s 45 mm drivers deliver studio-quality sonic accuracy and the headphones utilize Bluetooth 5.0 and are compatible with aptX and AAC codecs for the best-possible wireless audio reproduction. Controls mounted on the left earcup provide easy handling of phone calls and music listening. An internal battery provides up to 40 hours on a full charge, and the headphones can also be used in wired mode. The ATH-M50xBT is compatible with the AT Connect smartphone app.

…ends 715 words

Click here for AT-LPW50PBATH-G1WLATH-CK3TWATH-ANC300TWATH-WP900 and ATH-M50xBT product profiles and downloadable high-res photos.

AT-LPW50PBATH-G1WLATH-CK3TW
 ATH-ANC300TWATH-WP900ATH-M50xBT

 
Also see more here:

– Audio-Technica Promotional Video: “Always Listening to the Music That Moves Us”
– Additional News Releases

      

Celebrating over 50 years of audio excellence, Audio-Technica is a recognized leader in the development and manufacture of high-quality personal and professional audio equipment. Founded in Japan in 1962 by Hideo Matsushita, the company made its name by manufacturing state-of-the-art phonograph cartridges and tonearms. Today, Audio-Technica is a worldwide group of companies devoted to creating high-performance microphones, headphones, wireless systems, mixers, turntables, phono cartridges and other electronic products.

Audio-Technica LP-120XUSB (Black) Manual direct-drive turntable ...



A reputation for quality, durability, performance and value has made Audio-Technica products the first choice for many of today’s top musical artists and audio engineers, and for discerning listeners everywhere. Drawing from its audiophile heritage, Audio-Technica remains dedicated to providing music enthusiasts with great-sounding, innovative audio gear, including the award-winning QuietPoint active noise-cancelling headphones, popular ATH-M50x monitor headphones, versatile USB microphones, and new Hi-Res Audio headphones and high-fidelity gaming headsets. Learn more at www.audio-technica.com.

Lotmaxx launches new SC-10 Shark on Kickstarter

Imagine a desktop 3D printer that can print faster than average, featuring multiple functions such as auto leveling, laser engraving and bicolor printing using simple add-ons. Plus build quality with premium materials, sleek and ergonomic design.

Now stop imagining. LOTMAXX SC-10 SHARK is a reality.  

LOTMAXX SC-10 SHARK is our latest and first-ever crowdfunded desktop 3D printer and we chose to launch on Kickstarter for a reason. Kickstarter is always the base of unlimited creativity. Helping to bring the creative projects to life, Kickstarter would be the proven bridge between LOTMAXX and the 3D printing community by bringing us together.

We believe that 3D printing has unlimited potential, and we’re only just at the beginning of this emerging industry. 3D printing technology is penetrating widely and deeply across industrial, makers and consumer sectors. It’s by launching on Kickstarter and connecting LOTMAXX with backers, getting feedback and conducting discussion that we can make further progress on development of 3D printing.

We’re just getting started and your opinions matter to us. 

Establishing ourselves in 2018, LOTMAXX is a cutting-edge technology company specializing in 3D printing. Gathered with more than 100 professionals, experienced developers and engineers from 3D printing, tablet computer and machine manufacturing industries, we’ve harnessed the great capability of design, research and production of 3D printing.

We want to vitalize the industry with our innovation. By breaking further ground in 3D printing technology, we managed to bring LOTMAXX SC-10 SHARK to Kickstarter. It’s printing faster, it’s more than the average desktop 3D printer.

It’s beyond your imagination.

Packing the Aeolus Heat Dissipation system (AHDS) and S Move System (SMS), LOTMAXX SC-10 SHARK has effectively boosted the print speed and successfully saved up to 30% average print time*. 

*Source: stats from LOTMAXX lab.   

S Move System

LOTMAXX SC-10 stays cool while printing, thanks to the unique and signature design of its modular nozzles.  The Aeolus Heat Dissipation system (AHDS) is a highly efficient  dissipation system with its uniquely developed four-fan design. This cools the nozzle from all angles, increasing the efficiency of heat dissipation by 42%*(measured in LOTMAXX lab) without compromising sprinting quality and print speed. LOTMAXX SC-10 SHARK has three speed modes available: normal, middle, and fast speed, to match your preference and need. Combining the high-speed motor, LOTMAXX SC-10 SHARK is a powerhouse that guarantees unparalleled speed as well as the stability.     

The four-fan structure
Printing faster

Auto leveling, laser engraving and bicolor printing, your call. LOTMAXX SC-10 SHARK is the whole package. No need to recode and no further adjustment is required, plug and play, it’s just that easy!  

There are 2 colors of SC-10 Shark(Deep Purple/Space Gray)

LOTMAXX SC-10 SHARK comes with optional automatic bed leveling feature. The ultra-precise technology allows for 0.1mm accuracy. While the unleveled bed might cause nozzle clogging, scratch marks and poor adhesion, the auto leveling is one of the most important benefits that LOTMAXX SC-10 SHARK can offer to the quality of your prints. Just tap the touch screen to activate the auto leveling interface, the inductive sensor will probe the heated bed. It precisely measures the print surface’s tilt, freeing you from the time-consuming and tricky manual process. Regardless of whether you are a newcomer or a skilled maker, you can enjoy a hassle-free auto leveling with SHARK!

Note: LOTMAXX procures 3D touch & BL touch from suppliers.

Auto-leveling
The 3D Touch

LOTMAXX SC-10 SHARK supports an optional 1.6 W laser engraving and allows you to engrave with a wide variety of materials like wood, plastic, leather, PVC, paper and resin. The interchangeable module is extremely easy to apply on. Plug and engrave, simply attach the laser engraver module next to the printhead and you’re ready to witness creativity turning into reality.  

Ever so often, it’s color making the artwork unique and special. While most of the 3D printers come with just one nozzle, LOTMAXX SC-10 SHARK offers optional dual color print head tier. Besides the basic option, you may choose a different package that comes with two extruders and one nozzle. Expand the possibility and upgrade your artwork, why not?

We have one of their original SC-10 printers and are very impressed with it. We are backers of the new SC-10 Shark on kickstarter. We are very eager to receive the new printer and put it through its’ paces.

HAPPY NEW YEAR FROM OUR CHIEF BLOGGER–2020!

We wish a happy new year to all of our friends, followers, and readers!

We are coming up on our 9th year on the web.

We do reviews and beta testing. We also advocate for education, autism, and help veterans too.

We are also on youtube , Http://www.youtube.com/technewszone please subscribe and tell folks about us and our tech news and reviews!

I am one month away from my 51st birthday. It is crazy how fast the last 20 years sure have flown by.

2019 was the worst financial year for my family and I.

Besides being a tech blogger, I am also in construction sales.

Let’s hope for the best in the year and decade to come!

We will be attending CES as press soon, and look forward to testing, and reviewing new products and technology.

Thanks,

David J. Berkowitz

Chief Tech Blogger, Beta tester and reviewer

Happy 4th of July, 2019

Happy 4th of July to all from David with Technewszone.com! I am a tech blogger, love 3d printing and drones and other tech too. I am an Army Veteran and father of 3 with Autism too. I am an aspie too. I am an AEPi alumni as well and a UNLV alumni.

We will have 3d printing reviews and other tech reviews up soon!

I hope everyone has a great weekend and holiday!

We have been on the web since January 11, 2011!

Please check us out on youtube–Http://www.youtube.com/Technewszone

Capsulier’s the compact custom-blend capsule packaging machine Subhead: Capsulier LITE starts pre-order in October

 

San Francisco, CA, Capsulier, a single-serve coffee pod packaging company, releases Capsulier LITE on soft launch Pre-Order Campaign. Capsulier LITE is a one stop, simple to use, mess free, Capsule Packaging. It is not only allowed consistent and fresh tasted capsule to be made, on demand but also it is redefined the standard of capsule coffee.  

Comes with a special Stainless Steel Reusable Capsule (CAPSI), convenient can now save our environment and our money at the same time. By having Capsulier LITE, anyone would act as a barista to create the own blend professionally, anytime, anywhere. These are the major blossoming factors of Capsulier LITE is developed.

 

Capsulier gives a great offer starting from USD59 that the customers will receive a set of Capsulier LITE and CAPSI in Nov 2018. It is sustainable that CAPSI is reusable and stainless-steel made. To rinse with water, CAPSI is back to clear and sharp; it would go back to Capsulite LITE to create more your custom blend.

 

Capsulier LITE is trimmed to be slimmer while the mechanical design is patented technology. Capsulier LITE is introduced as a manual capsule packaging gadget .  Capsulier LITE offers a distinctly new approach to Capsule Packaging, with features that make anyone at home to be their personal barista.

 

Capsulier LITE provides:

 

One quick push: Capsulier LITE is a capsule packaging gadget to make a single capsule in an eyeblink. From your favourite bag of ground coffee to a mess free cup of single serve coffee, a simple gesture using the lever will complete your tailor made capsule in just two seconds.

 

Consistency: Consistency is a gifted ability to any experienced barista; we made Capsulier LITE the perfect tool for anyone to package the own uniform capsule. which means you can expect the same good taste of coffee to be made customly every time. It is a truly mess-free capsule packaging process.

 

Custom blend: It gives a custom blend by any kind of coffee and herb, and even mix and match of your own choice. It feeds various of choices when it comes to make your own cup of beverage, for instance, butterfly pea tea, osmanthus tea, cinnamon tea, and rose medium roasted coffee, lavender italian roasted coffee, critic dark roasted cafe latte. It is not even mentioned about the cost is reduced as every ingredient is chosen by your own.

 

Nespresso Compatible : Capsulier LITE is designed to be Nespresso compatible. After custom freshly blend, CAPSI is put into Nespresso Lattissima One, a cup of your own blended is freshly made. Capsulier LITE is one-half smaller as Nespresso Lattissima One, and also Capsulite LITE only costs one-fifth less than Nespresso Lattissima One.

Media wishing to learn more about the company or interview Capsulier personnel should contact us at cs@capsulier.com

 

https://www.capsulier.com

Capsulier LITE  Video Clip